Hikvision DS-K1TA70MI-T Face Recognition Terminal Temperature Screening Access Control

Hikvision DS-K1TA70MI-T Face Recognition Terminal Temperature Screening Access Control

 Supports Vanadium Oxide uncooled sensor to measure target’s temperature
 Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C
 Recognition distance: 0.5 to 1.5 m
 Fast temperature measurement mode: Detects face and takes temperature without identity authentication
 Multiple authentication modes are available: card and temperature, face and temperature, card and face and
temperature, etc
 Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the
same time, the authentication or attendance is valid
 Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At
the same time, the authentication or attendance will be failed
 Displays temperature measurement results on the authentication page
 Triggers voice prompt when detecting abnormal temperature
 Configurable door status (open/close) when detecting abnormal temperature
 Transmits online and offline temperature information to the client software via TCP/IP communication and saves the
data on the client software
 Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
 6000 face capacity, 6000 card capacity, and 100,000 event capacity
 Suggested height for face recognition: between 1.4 m and 1.9 m
 Supports 6 attendance status, including check-in, check out, break-in, break out, overtime in, overtime out
 Watchdog design and tamper function
 Audio prompt for authentication result
 NTP, manually time synchronization, and auto synchronization
 Connects to external access controller or Wiegand card reader via Wiegand protocol